工业变换炉最佳催化剂粒度

本文在建立数学模型的基础上，用计算机模拟变换炉的操作工况，考察改变催化剂粒度对经济效益的影响，从而得到工业变换炉催化剂颗粒最佳尺寸，开发了以经济效益为考察依据，工业反应器中催化剂颗粒最佳尺寸的计算方法。     

Effects of ultrasonic oscillation on processing behaviors of PS,EPDM, and PS/EPDM blend

In this study, the extrusion processing behaviors of polystyrene (PS), ethylene–propylene–diene terpolymer (EPDM), and their blend (PS/EPDM, 80/20) were studied by using a special ultrasonic oscillation extrusion system developed in our laboratory. The die pressure and volume flow rate were measured at different ultrasonic intensities and screw rotation speeds. The dependences on ultrasonic intensity of die pressure, volume flow rate, and apparent viscosity of polymers, as well as die swell at the same screw rotation speed were investigated. The effects of screw rotation speed on the processing behaviors of polymers and their blend at the same ultrasonic intensity were also studied. The experimental results showed that in the presence of ultrasonic irradiation, the processibilities of polymers and their blend were improved. Their possible mechanism is discussed in this article. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1856–1863, 2006     

N-异丙基丙烯酰胺凝胶在NaCl水溶液中溶胀行为的预测研究

In this paper, a model is presented to correlate and predict the swelling behavior of hydrogels in aqueous solutions of electrolytes. The model is a combination of VERS-model, “phantom network“ theory and “free-volume“ contribution. The VERS-model is used to calculate Gibbs excess energy; “phantom network“ theory to describe the elastic properties of polymer network, and “free-volume“ contribution to account for additional difference in the size of the species. To test the model, a series of N-isopropylacrylamide based hydrogels are synthesized by free radical polymerization in oxygen-free, deionized water at 25~C under nitrogen atmosphere. Then, the degree of swelling of all investigated gels as well as the partition of the solute between the gel phase and the surrounding coexisting liquid phase are measured in aqueous solution of sodium chloride. The model test demonstrates that the swelling behavior correlated and predicted by the model agrees with the experimental data within the experimental uncertainty. The phase transition appeared in the experiment, and the influences of the total mass fraction of polymerizable materials ξgel as well as the mole fraction of the crosslinking agent YCR on the swelling behavior of IPAAm-gels can also be predicted correctly. All these show the potential of such model for correlation and prediction of the swelling behavior of hydrogels in aqueous solutions of electrolytes.     

Ultrasonic oscillations effect on rheological and processing properties of metallocene‐catalyzed linear low density polyethylene

The effects of ultrasonic oscillations and die materials on die pressure, productivity of extrusion, melt viscosity of metallocene‐catalyzed linear low density polyethylene (mLLDPE), as well as their mechanism were studied in a special ultrasonic oscillations extrusion system developed in our lab. Die materials used in our experiment included steel, brass, and polytetrafluoroethylene (PTFE)_. The experimental results showed that ultrasonic oscillations as well as die materials have great influence on the rheological and processing behavior of mLLDPE. Ultrasonic oscillations can greatly increase the productivity of mLLDPE melt extruded through different dies, and can decrease the die pressure and the melt viscosity of mLLDPE. Compared with steel or brass die, mLLDPE melt extruded through PTFE die is more sensitive to ultrasonic oscillations. A possible mechanism for the improved processability of mLLDPE is proposed in this article. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1873–1878, 2003     

微机用于抛物线齿同步带传动强度理论的研究

采用啮合原理与弹性力学复交函数相结合的方法，借助计算机对抛物线齿同步带传动强度理论进行了系统研究，并将整个计算过程编制成ＲＨＤＧＲＡＰＨ软件。利用该软件进行了带齿和轮齿及刀具齿形设计、啮合原理分析、应力和变形计算、刀具可加工最小齿数的确定及加工误差分布计算。     

基于SOA架构的立法决策支持系统研究

党的十八大报告将“全面推进依法治国”确立为推进政治建设和政治体制改革的重要任务,而立法工作是其中最重要的基础工作.立法工作相关信息化系统的建设为立法工作提供了重要技术支撑,而随着立法工作中各项业务系统的联系性需要更加紧密,集成度要求越来越高,信息资源的共享范围需要越来越广,使得各业务系统的互联互通和流程规范化等问题成为了立法工作信息化建设必须要面对的一个关键问题.单个的业务系统拓展、功能强化、硬件升级已经不能满足要求,而基于ESB（企业服务总线enterprise service bus）的架构平台,以服务作为基本管理单元提供了很好的解决方案,它可以消除不同业务系统之间的技术差异,让不同业务系统协调运作,从而实现不同业务之间的通信与资源整合.     

基于Testbed的C++单元测试(动态测试)方法

自动化单元测试是保障通信类软件质量的重要手段,业界没有什么普适性方法。但通常是借助于第三方工具。本文介绍的Testbed测试工具套件是通第三方认证公司认可的安全软件测试工具,能够支持多种语言的自动化测试．本文主要介绍了如何使用TESTBED测试工具对C＋＋代码进行单元测试,对测试方法进行介绍,并从工程实践的角度,进行了测试步骤分解,最后从软件开发和项目管理的角度对单元测试的组织给出了建议。     

关联规则算法在法规备案审查工作中的应用

根据宪法和有关法律规定,全国人大常委会监督宪法和法律实施可以采取多种形式,法规备案审查正是其中一个重要的监督方式.我国的法规备案审查制度包含着违宪性审查和违法性审查两个层次的内容,其最高层次的法律渊源是宪法.现行宪法规定,全国人大常委会有权撤销国务院制定的同宪法、法律相抵触的行政法规、决定和命令,撤销省、自治区、直辖市国家权力机关制定的同宪法、法律和行政法规相抵触的地方性法规和决议.法规审查是一个复杂的过程,对具体负责审查工作的人员有极高的法律法规知识要求.因此,提高法规审查的科学性、客观性和准确性,是当前法规审查工作重要的课题.本文结合当前法规备案审查的实际,提出了法规关联分析评价指标体系,应用于法规审查工作中,并在此基础上设计并实现了法规备案审查系统.     

多媒体教学服务系统的设计

本文从实际使用出发,提出了多媒体教学系统的设计思路,主要介绍了多媒体教学系统的系统结构、主要系统功能等。     

4G网络环境下移动终端安全威胁及防护研究

4G网络即第四代移动网络,提供了高速的移动通信速率和多平台接入能力,4G网络环境下,移动终端的安全防护变得更加复杂,移动终端安全问题日益凸显,本文介绍了4G网络特点、4G网络移动终端面临的新的威胁、提出相关的解决方法.